10T/16T/18T/21T Hydraulic Rebar Bender Manual Tube Bending Machine Stainless Steel Pipe Bending Tool Powerful Hydraulic Plier

Name: manual hydraulic pipe bender

About shipping fee

If you find that there is a problem with the shipping fee when you place an order,

please contact us to check.

■Model:SWG-1

■ Name: overall hydraulic pipe bender

■ Output force:10T

■ Stroke: 170mm

■ crimping range:1/4″-1″

■Outside diameter:Φ13mm-Φ34mm

■Configuration mold:1/4″,5/16″,3/8″,1/2″,3/4″,1″

Corresponding diameter:Φ13,Φ16,Φ19,Φ22,Φ28,Φ34

■Wall thickness of pipe:2-3.5mm

■Weight:20kg

Mold and outside diameter marked size.

SWG-2

2 inch machine complete set of molds: a total of 6 molds; the following are the mold specifications.

4 points 16 (outside diameter 22mm), 6 points 22 (outside diameter 26.8mm), 1 inch 25 (outside diameter 33mm), 1-1/4 inch 32 (outside diameter 43mm), 1-1/2 inch 40 (outside diameter 48mm), 2 inch 50 (outside diameter 60mm).

SWG-3

3 inch machine full set of molds: 8 molds in total; the following are the mold specifications.

4 minutes 16 (outside diameter 22mm), 6 minutes 22 (outside diameter 26.8mm), 1 inch 25 (outside diameter 33mm), 1-1/4 inch 32 (outside diameter 43mm), 1-1/2 inch 40 (outside diameter 48mm), 2 inch 50 (outside diameter 60mm), 2-1/2 inch 65 (outside diameter 76mm), 3 inch 80 (outside diameter 89mm).

SWG-4

4 inch machine complete set of molds: 9 molds in total; the following are the mold specifications.

4 min 16 (OD 22mm), 6 min 22 (OD 26.8mm), 1 inch 25 (OD 33mm), 1-1/4 inch 32 (OD 43mm), 1-1/2 inch 40 (OD 48mm), 2 inch 50 (OD 60mm), 2-1/2 inch 65 (OD 76mm), 3 inch 80 (OD 89mm), 4 inch 100 (OD 108mm)

SWG-5

5-inch machine with 114 mold specifications: a total of 9 molds; the following are mold specifications.

4 points 16 (diameter 22mm), 6 points 22 (diameter 26.8mm), 1 inch 25 (outside diameter 33mm), 1-1/4 inch 32 (outside diameter 43mm), 1-1/2 inch 40 (outside diameter 48mm), 2 inch 50 (outside diameter 60mm), 2-1/2 inch 65 (outside diameter 76mm), 3 inch 80 (outside diameter 89mm) 4 inch 100 (outside diameter 114mm).

Wooden box packing: W 45 L 49 H 15

Our cylinders are larger than others tonnage, the mold is thickened, the machine is heavier than the weight of others

Hydraulic pipe bender range of use: special bending galvanized pipe, welded pipe, seamless steel pipe, for general water pipe, iron pipe, wire pipe, gas pipe, thick steel pipe, etc., angle bending maximum 90 degrees. Mold using ductile iron manufacturing, than ordinary cast iron has a higher strength, better toughness and plasticity, more resistant to use, not easy to fracture and other benefits

Scope of use: applicable to general water pipes, conductor pipes, gas pipes, thick steel pipes, etc., angle bending up to 90 degrees.

Mold are made of ductile iron, than ordinary gray cast iron has higher strength, better toughness and plasticity, more resistant to use, not easy to fracture