3040 3 Axis 4 Axis CNC Engraving Machine Wood Carving Cnc Router Engraver 30*40 Pcb Cutting Tool Parallel USB Port 220V 110V

Hot sell CNC 3040 Z-DQ 3 4 axis engraving machine wood carving router pcb cutting tool parallel or USB port 220V 110V

Introduction
The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
The cnc router is designed for large area engraving work such as Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home.

Model and Technical Parameters
MODEL 3040Z-DQ
Attribute 3axis 3axis+H 4axis 4axis+H
Axis 3axis 3axis 4axis 4axis
Interface Parallel port/ USB port Parallel port/ USB port Parallel port/ USB port Parallel port/ USB port
Limit switch Yes yes Yes Yes
Tool auto-checking Yes Yes Yes Yes
Add Remote control handle No Yes No Yes
Spindle Motor: 300W 300W 300W 300W
Type of screw Ball screw Ball screw Ball screw Ball screw
Weigh 29 29 34 34
Machine Dimensions: 620X490X410mm
Rack material: 6061 and 6063 Hard aluminum alloy
(The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.)
Engraving area: 380X285mm
Z-Axis Stroke: 55mm, Engraving depth depends on the length of the tool edge
Acceptable material thickness: ≤80mm
Rail type: Chromeplate shaft + Linear Bearings, Surface hardening 61HRC
Type of screw: Ball screw 1605, Pitch 4mm
Spindle motor: 300W/11000r/min((Very small noise))
Collet type: ER11,1/8"(3.175mm) Collet
Stepper motor and drive: two-phase hybrid stepping motor 57BYGH-1.8A
Maximum operating speed: 4000mm/min (Engraving speed: 100-2500mm/min)
Repeat positioning Accuracy: 0.03mm
Software Compatability: Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM, coppercam)
Command code: G code/.nc/.ncc/.tab/.txt
Rotation Axis (4th Axis)
Description: Center height: H = 50mm
Maximum turning diameter: ≤95mm
Deceleration ratio: 3:1
Stepper motor: NEMA23-2.5A
Weight: 42KG