OCTOCAT 350ST AC DC Electric Wire Plug Plastic Clamping Machine Vertical Injection Molding Equipment Cable Manufacturing Forming
1. High-speed mold clamping, low-pressure slow-speed mold clamping.
2. Fully computerized and controlled by position ruler, easy to operate and accurate, the injection adopts a double-cylinder balanced injection system, which is stable and powerful.
3. It is more suitable for molding of various special engineering plastics.
4. The clamping system adopts the supercharged large cylinder in the middle, and the traction cylinder is independent and external, and the clamping is stable and fast.
5. Single and double slides can be installed for more convenient operation and higher safety.
|Berrel HeatingPower||2.8 kw|
|Distance Between Tie Bere||370X220mm|
|Injection molding machine||Forming Machine|
|jetor Force||2 Tons|
|Machine weight||1350 kg|
|machines for production||production|
|Max.Hydaulic Pressure||140 kg/cm|
|Max.Open daylight||320/370 mm|
|Numder of temperature Control||3/4 Snt|
|plastic injection machines||forming|
|Pump Motor power||5.5/7.5HP|
|Pump Ourput||41 1/min|
|Screw Speed Max||0-280 Turn|