CNC Router Engraver Machine 3020Z 3040Z 500W Spindle For Woodworking

0 reviews / Write a review

Price in reward points: 1212

Brand: LYBGACNC
Product Code: ly725696453
Availability: In Stock

Ships From

Color

- +

CNC Router Engraver Machine 3020Z 3040Z 500W Spindle For Woodworking

Introduction

The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.

The router is designedfor large area engraving work such as Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home.

Model and Technical Parameters

MODEL	3020Z-D500W
Attribute	3axis-LPT	3axis-USB	4axis-LPT	4axis-USB
Axis	3axis	3axis	4axis	4axis
Interface	LPT port	USB port	LPT port	USB port
Limit switch	Yes	yes	Yes	Yes
Tool auto-checking	Yes	yes	Yes	Yes
Spindle Motor:	500W	500W	500W	500W
Type of screw	Ball screw	Ball screw	Ball screw	Ball screw
Weigh	33	33	40	40
Machine Dimensions：	490X420X425mm
Rack material：	6061 and 6063 Hard aluminum alloy (The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.)
Engraving area：	300X200mm
Z-Axis Stroke：	60mm, Engraving depth depends on the length of the tool edge
Acceptable material thickness：	≤60mm
Rail type：	Chromeplate shaft + Linear Bearings, Surface hardening 61HRC
Type of screw：	Ball screw 1605, Pitch 4mm
Spindle motor：	500W/11000r/min（(Very small noise)）
Collet type：	ER11,1/8"(3.175mm) Collet
Stepper motor and drive：	two-phase hybrid stepping motor 57BYGH56-4011YD, 8 segments drive.
Maximum operating speed：	4000mm/min (Engraving speed :300-3000mm/min)
Repeat positioning Accuracy：	0.03mm
Software Compatability：	Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM, coppercam)
Command code：	G code/.nc/.ncc/.tab/.txt
Rotation Axis (4th Axis) Description:	Chuck Size: 80mm self-centering chuck Center height: H = 49mm Clamping diameter: 80mm or less Deceleration mode: synchronous wheel / belt Deceleration ratio: 3:1 Stepper motor: 57 type two phase 4 line Positioning accuracy: 0.075 °

MODEL	3040Z-D500W
Attribute	3axis-LPT	3axis-USB	4axis-LPT	4axis-USB
Axis	3axis	3axis	4axis	4axis
Interface	LPT port	USB port	LPT port	USB port
Limit switch	Yes	yes	Yes	Yes
Tool auto-checking	Yes	yes	Yes	Yes
Spindle Motor:	500W	500W	500W	500W
Type of screw	Ball screw	Ball screw	Ball screw	Ball screw
Weigh	43	43	50	50
Machine Dimensions：	600X510X480mm
Rack material：	6061 and 6063 Hard aluminum alloy (The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.)
Engraving area：	400X300mm
Z-Axis Stroke：	80mm, Engraving depth depends on the length of the tool edge
Acceptable material thickness：	≤100mm
Rail type：	Chromeplate shaft + Linear Bearings, Surface hardening 61HRC
Type of screw：	Ball screw 1605, Pitch 4mm
Spindle motor：	500W/11000r/min（(Very small noise)）
Collet type：	ER11,1/8"(3.175mm) Collet
Stepper motor and drive：	two-phase hybrid stepping motor 57BYGH56-4011YD, 8 segments drive.
Maximum operating speed：	4000mm/min (Engraving speed :300-3000mm/min)
Repeat positioning Accuracy：	0.03mm
Software Compatability：	Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM, coppercam)
Command code：	G code/.nc/.ncc/.tab/.txt
Rotation Axis (4th Axis) Description:	Chuck Size: 80mm self-centering chuck Center height: H = 49mm Clamping diameter: 80mm or less Deceleration mode: synchronous wheel / belt Deceleration ratio: 3:1 Stepper motor: 57 type two phase 4 line Positioning accuracy: 0.075 °