Electromagnetic Vibration Table, Circuit Board Toy Virtual Welding, False Welding Vertical And Horizontal Vibration Tester

Electromagnetic Vibration Table, Circuit Board Toy Virtual Welding, False Welding Vertical And Horizontal Vibration Tester

A1: 50CM vertical low table key type

A2: 50CM four-dimensional space in one

A3: 50CM six-degree space in one

A4: 100CM high table top vertical intelligent touch screen type

A5: 100CM four-dimensional space in one

A6: 100CM six-degree space in one

Note: 50CM, 75CM, 100CM, countertops are optional

Sizes and fixtures and orientations can be customized according to the product.

Electromagnetic vibration table is widely used in defense, aviation, communications, electronics, automobiles, home appliances, and other industries. It is used to find early faults, simulate actual working conditions and structural strength tests. Sine wave, FM, frequency sweep, time control.

Features of electromagnetic four-dimensional space integrated vibration table instrument:

1. Intuitive control, easy to operate; fixed frequency, sweep frequency, and the program can be easily switched at any time;

2. With time timing and countdown display functions;

3. Touch controller, easy and convenient to operate, which solves the disadvantage of inconvenient operation of digital display;

4. Control parameters are displayed synchronously in real time without manual intervention:

5. Adopting anti-vibration device, easy installation, stable operation, no need to install anchor screws;

6. Embedded amplitude prediction program and easy amplitude modulation:

7. Four-point synchronous excitation, the table vibrates evenly;

8. Stepless adjustment of amplitude, fixed frequency and frequency sweep operation functions to adapt to various tests in different industries

9. Add an anti-interference circuit to solve the interference of strong electromagnetic fields on the control circuit. 10. Curve display function, you can check the frequency waveform change at any time; 11. The curve supports the direct export function; and 12. The working direction is automatically switched;

13 vibration modes in different running directions can work simultaneously;

Product parameters:

Test load: 60KG;

Vibration direction: vertical + horizontal (automatic switching, can run vibration directions of different frequencies at the same time) table size (mm): 500x500;

Amplitude (P-P): 0-5mm (random, change with the frequency, adjustable) Sweep: 1-600HZ can be set arbitrarily (true standard back and forth sweep) Maximum acceleration: 10g;

Indicator functions: frequency modulation, frequency sweep, time, program;

Precision: the frequency can be displayed to 0.1Hz, and the precision is 0.1Hz;

Programmable function: 5-600HZ1-8 segments can set frequency and time arbitrarily for each segment; frequency multiplier (0.1Hz): 8 segments increase in multiples ① low to high frequency ② high to low frequency: ③ low to high and then to low frequency /recyclable;

Logarithmic power (0.1Hz): ① down to upper frequency ② up to lower frequency ③ down to upper and then down to lower frequency--3 modes logarithmic/cyclable; Vibration waveform: sine wave; time control: time can be set ;Power:1.2KW;

For more parameters and customization, please contact customer service, thank you;