Detailed description Full automatic cut strip one end crimping another end stripping tinning 501S
1. cut off the wire, peeling, tin and other related actions will be automatically adjusted with time.
2. the production line can range from AWG18-AWG32, which is very practical.
3. this machine has the function of twisting.
4. ultra short line: middle leaving glue for 18mm
5. the machine's Tin angle is close to 90 degrees so that the diameter of the wire is evenly distributed.
6. the machine adjusts the depth of spots by dispersion control. Make the spot depth more accurate.
7. the machine is suitable for horizontal, straight OTP mold.
Wire length 50mm, about 3,200wires/hour(no twisting)
Applicable wire diameter
AWG # 32 ~
(Central section with jacket remaining) 18mm~99,990mm (wire clip can be refitted to 8mm)
Maximum adjustment 3.50mmresolution 0.01mm
Low air pressure, existing of electric wire, existing of terminal, abnormal stripping, abnormal crimping, abnormal ingoing wire.
feeding synchronizer, terminal waste
paper rewinding device